Users Guide
Version Description
8.4.2.1 Introduced on the S-Series.
Usage Information Host tables are not stored in CAM tables on S-Series platforms. Entries for camIndex displays as zero (0)
on the show ipv6 fib stack-unit output for neighbor entries, such as address resolution protocol
(ARP) entries.
show ipv6 owlabel-zero
Display the ow label zero setting.
S4810
Syntax
show ipv6 flowlabel-zero
Default Disabled
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Related Commands
• ipv6 nd dad attempts — congure system to set the ow label eld in the packets to zero.
show ipv6 interface
Display the status of interfaces congured for IPv6.
S4810
Syntax
show ipv6 interface interface {slot | slot/port} [brief] [configured]
[stack-unit id]
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
IPv6 Basics
871