Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4810P

861

862

863

864

865

866

867

868

869

870

Default 3 attempts

Command Modes INTERFACE (management interface only)

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

ipv6 nd dns-server

Congures Recursive DNS Server (RDNSS) addresses to be distributed via IPv6 router advertisements to an IPv6 device.

Syntax

ipv6 nd dns-server {ipv6-RDNSS-address} {lifetime | infinite}

To remove the IPv6 RDSS conguration, use no ipv6 nd dns-server {ipv6-RDNSS-address}

{lifetime | infinite}

Parameters

ipv6-RDNSS-

address

Enter the IPv6 Recursive DNS Server’s (RDNSS) address. You can specify up to 4

IPv6 RDNSS server addresses.

lifetime Enter the lifetime in seconds. The amount of time the IPv6 host can use the IPv6

RDNSS address for name resolution. The range is 0 to 4294967295 seconds.

When you specify the maximum lifetime value of 4294967295 or infinite, the

lifetime does not expire. A value of

0 indicates to the host that the RDNSS address

should not be used. You must specify a lifetime using the lifetime or

infinite parameter.

innite Enter the keyword infinite to specify that the RDNSS lifetime does not expire.

Defaults Not Congured

Command Modes INTERFACE CONFIG