Users Guide

Example (OpenFlow
instance)
Dell# show interfaces vlan 6
Vlan 6 is down, line protocol is down
Address is 00:01:e8:8a:e1:8c, Current address is 00:01:e8:8a:e1:8c
Interface index is 1107525638
of-instance: 2
Internet address is not set
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 00:05:12
Queueing strategy: fifo
Time since last interface status change: 00:05:12
Related Commands
• show interfaces congured – display any interface with a non-default conguration.
• show inventory (S-Series and Z-Series) – display the S-Series and Z-Series switch types, components
(including media), Dell Networking OS version including hardware identication numbers, and congured
protocols.
• show ip interface – display Layer 3 information about the interfaces.
• show range – display all interfaces congured using the interface range command.
show interfaces congured
Display any interface with a non-default conguration.
S4810
Syntax
show interfaces configured
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
Interfaces
723