Users Guide

Usage Information

RFC 3986 species that IPv6 host addresses in a uniform resource identier (URI) must be enclosed in

square brackets, [X:X:X:X::X]. For maximum exibility this command accepts IPv6 host addresses with or

without the square brackets.

After you upgrade the system image, by entering the command. specify the location where the Dell

Networking OS image used to boot the system is stored (boot system), save the conguration to the

start-up cong le (write memory), and reload the system (reload).

Example

Dell# upgrade system tftp://10.11.8.12/dv-rainier-13 a:

00:39:32:Discarded 1 pkts. Expected block num:51. Received block num:50

!00:39:36:Discarded 1 pkts. Expected block num:65. Received block num:64

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

...........................................................

...........................................................!

93924044 bytes successfully copied

System image upgrade completed successfully.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Image upgraded to all

Dell#

rename

Rename a le in the local le system.

Syntax

rename url url

Parameters

url Enter the following keywords and a lename:

• For a le on the internal Flash, enter flash:// followed by the lename.

• For a le on an NFS mounted le system, enter nfsmount:// followed by the

mount point and le path.

•

For a le on an external USB drive, enter usbflash:// followed by the

lename.

Command Modes EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON. Added support for NFS mount.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

File Management