Users Guide

Parameters
number Enter a number as the interface number. The range is from 0 to 16383.
Defaults Not congured.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.4.1.0 Introduced
Example
Dell(conf)# interface loopback 1655
Dell(conf-if-lo-1655)#
Related Commands
• interface — congure a physical interface.
• interface null — congure a Null interface.
• interface port-channel — congure a port channel.
• interface vlan — congure a VLAN.
interface ManagementEthernet
Congure the Management port on the system (either the Primary or Standby RPM).
S4810
Syntax
interface ManagementEthernet slot/port
Parameters
slot/port Enter the keyword ManagementEthernet, then the slot number (0 or 1) and
port number zero (0).
Defaults Not congured.
Command Modes CONFIGURATION
698
Interfaces