Users Guide

Parameters
fcf-mac-address Enter the MAC address of the FCF to display.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage Information The following describes the show fip-snooping fcf command shown in the following example.
Field Description
FCF MAC MAC address of the FCF.
FCF Interface Slot/port number of the interface to which the FCF is connected.
VLAN VLAN ID number the session uses.
FC-MAP FC-Map value the FCF advertises.
ENode Interface Slot/ number of the interface connected to the ENode.
FKA_ADV_PERIOD Time (in milliseconds) during which FIP keep-alive advertisements transmit.
No of ENodes Number of ENodes connected to the FCF.
FC-ID Fibre Channel session ID the FCF assigns.
Example
Dell# show fip-snooping fcf
FCF MAC FCF Interface VLAN FC-MAP FKA_ADV_PERIOD No. of Enodes
------- ------------- ---- ------ -------------- -------------
54:7f:ee:37:34:40 Po 22 100 0e:fc:00 4000 2
show p-snooping statistics
Display statistics on the FIP packets snooped on all interfaces, including VLANs, physical ports, and port channels.
S4810
Syntax
show fip-snooping statistics [interface vlan vlan-id | interface port-type
port/slot | interface port-channel port-channel-number]
Parameters
vlan-id Enter the VLAN ID of the FIP packet statistics displays.
port-type port/slot Enter the port-type and slot number of the FIP packet statistics displays.
FIP Snooping
619