Users Guide
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.7(0.0) Introduced on the Z9500 and S6000-ON.
9.2(0.2) Introduced on the S4810 and S4820T.
p-snooping port-mode fcf
Congure the port for bridge-to-FCF links.
S4810
Syntax
fip-snooping port-mode fcf
To disable the bridge-to-FCF link on a port, use the no fip-snooping port-mode fcf command.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage Information The maximum number of FCFs supported per FIP snooping-enabled VLAN is four.
p-snooping port-mode fcoe-trusted
Congure the port for bridge-to-bridge links.
S4810
Syntax
fip-snooping port-mode fcoe-trusted
To remove the bridge-to-bridge link conguration from the port, use the no fip-snooping port-mode
fcoe-trusted command.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
616
FIP Snooping