Users Guide
Usage Information The maximum number of FCFs supported per FIP snooping-enabled VLAN is four. The maximum number of
FIP snooping sessions supported per ENode server is 16.
p-snooping fc-map
Congure the FC-MAP value FIP snooping uses on all VLANs.
S4810
Syntax
fip-snooping fc-map fc-map-value
To return the congured FM-MAP value to the default value, use the no fip-snooping fc-map
command.
Parameters
fc-map-value Enter the FC-MAP value FIP snooping uses. The range is from 0EFC00 to 0EFCFF.
Defaults 0x0EFC00
Command Modes
• CONFIGURATION
• VLAN INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
p-snooping max-sessions-per-enodemac
Congure the maximum session limit per ENode MAC address.
S4810
Syntax
fip-snooping max—sessions—per—enode—mac max-sessions-value
To return the congured maximum sessions to the default value, use the no fip-snooping max—
sessions—per—enode—mac command.
Parameters
max-sessions-value Enter the maximum number of sessions allowed per ENode MAC address. The
range is from 1 to 64.
Defaults 32
Command Modes CONFIGURATION
FIP Snooping
615