Users Guide

Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S6000, S6000-ON, and Z-Series.
ipv6 dhcp snooping vlan
Enable ipv6 DHCP Snooping on VLAN or range of VLANs.
Syntax
[no] ip dhcp snooping vlan vlan-id
To disable the ipv6 dhcp snooping on VLAN basis or range of VLAN, use the no ipv6 dhcp snooping
vlan <vlan-id> command.
Parameters
vlan-id Enter the name of a VLAN id or list of the VLANs to enable DHCP Snooping.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S6000, S6000-ON, and Z-Series.
ip dhcp snooping binding
Create a static entry in the DHCP binding table.
S4810
Syntax
[no] ip dhcp snooping binding mac address vlan-id vlan-id ip ip-address
interface type slot/port lease number
Parameters
mac address Enter the keyword mac then the MAC address of the host to which the server is
leasing the IP address.
vlan-id vlan-id Enter the keywords vlan-id then the VLAN to which the host belongs. The
range is from 2 to 4094.
ip ip-address Enter the keyword ip then the IP address that the server is leasing.
Dynamic Host Conguration Protocol (DHCP)
577