Users Guide

port-set 0–0 Enter the keyword port-set with a port-pipe number. The range is from 0 to 0.
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
show hardware stack-unit
Display the data plane or management plane input and output statistics of the designated component of the designated stack
member.
Syntax
stack-unit stack-unit-number {buffer [ unit 0 ] total buffer | buffer unit
0 interface all queue [(0-14) | a11] buffer-info}{cpu data-plane statistics
| cpu management statistics | drops [unit number] | fpga register | party-
bus statistics | stack-port | ti-monitor | unit 0-1 {counters | details |
port-stats [detail] | register}}
Parameters
stack-unit stack-
unit-number
{command-option}
Enter the keywords stack-unit to select a particular stack member and then
enter one of the following command options to display a collection of data based
on the option entered. The range is 0 to 11.
buer Enter the keyword buffer. To display the total buer statistics for the stack unit,
enter the keyword total-buffer. To display buer statistics for a all interface,
enter the keyword
interface followed by the keyword all.
To display total buer information for the port, enter the keywords buffer-info.
To display a queue range, enter 0 to 14 for a specc queue or all.
cpu data-plane
statistics
(Optional) Enter the keywords cpu data-plane statistics then the
keywords stack port and its number, from 0 to 63 to display the data plane
statistics, which shows the High Gig (
Higig) port raw input/output counter
statistics to which the stacking module is connected.
cpu management
statistics
Enter the keywords cpu management statistics to display the counters of
the management port.
Debugging and Diagnostics
539