Users Guide

dcb-map stack-unit all stack-ports all

Apply the specied DCB map on all ports of the switch stack.

Syntax

dcb-map stack-unit all stack-ports all dcb-map-name

To remove the PFC and ETS settings in a DCB map from all stack units, use the no dcb-map stack-

unit all stack-ports all command.

Parameters

dcb-map-name Enter the name of the DCB map.

Defaults None

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.3(0.0) Introduced on the S4810 and S6000 platforms.

Usage Information The dcb-map stack-unit all stack-ports all command overwrites any previous DCB maps

applied to stack ports.

show qos dcb-map

Display the DCB parameters congured in a specied DCB map.

S4810

Syntax

show qos dcb-map map-name

Parameters

map-name Displays the PFC and ETS parameters congured in the specied map.

Command Modes

• EXEC

• EXEC Privilege