Users Guide

EXEC Privilege
Command History
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3.(0.0) Introduced on the S4810, S4820T, Z9000 and MXL platforms
Usage Information The following regions must be provided in the show cam-usage output:
L3AclCam
L2AclCam
V6AclCam
The following table describes the output elds of this show command:
Field Description
LineCard Number of the line card that contains information on ACL VLAN groups
Portpipe The hardware path that packets follow through a system for ACL optimization
CAM-Region Type of area in the CAM block that is used for ACL VLAN groups
Total CAM space Total amount of space in the CAM block
Used CAM Amount of CAM space that is currently in use
Available CAM Amount of CAM space that is free and remaining to be allocated for ACLs
Example 1: Output of
the show cam-usage
Command
Dell#show cam-usage
Linecard|Portpipe|CAMPartition |TotalCAM|UsedCAM|AvailableCAM
========|========|==============|========|=======|===========
1 | 0 |IN-L2 ACL | 1008| 320| 688
| |IN-L2 FIB | 32768| 1132| 31636
| |IN-L3 ACL | 12288| 2| 12286
| |IN-L3 FIB | 262141| 14| 262127
| |IN-L3-SysFlow | 2878| 45| 2833
| |IN-L3-TrcList | 1024| 0| 1024
| |IN-L3-McastFib| 9215| 0| 9215
| |IN-L3-Qos | 8192| 0| 8192
| |IN-L3-PBR | 1024| 0| 1024
| |IN-V6 ACL | 0| 0| 0
| |IN-V6 FIB | 0| 0| 0
| |IN-V6-SysFlow | 0| 0| 0
| |IN-V6-McastFib| 0| 0| 0
| |OUT-L2 ACL | 1024| 0| 1024
| |OUT-L3 ACL | 1024| 0| 1024
| |OUT-V6 ACL | 0| 0| 0
1 | 1 |IN-L2 ACL | 320| 0| 320
| |IN-L2 FIB | 32768| 1136| 31632
| |IN-L3 ACL | 12288| 2| 12286
| |IN-L3 FIB | 262141| 14| 262127
| |IN-L3-SysFlow | 2878| 44| 2834
--More--
Example 2: Output
of the show cam-
usage acl Command
Dell#show cam-usage acl
Stackunit|Portpipe|CAMPartition|TotalCAM|UsedCAM|AvailableCAM
========|====== ==|============|========|=======|============
0 | 0 |IN-L3 ACL | 1024 | 4 | 1020
| |IN-V6 ACL | 512 | 0 | 512
| |IN-L2 ACL | 512 | 6 | 506
332
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)