Users Guide

trac for VLAN 10, while also switching untagged trac for VLAN 30 and tagged trac for VLAN 40. (To
allow VLAN 30 trac, you need the native VLAN feature. Use the portmode hybrid command. For
more information, see the portmode hybrid command.
Example 1
Dell(conf-if-te-1/42)# switchport
Dell(conf-if-te-1/42)# vlan-stack trunk
Dell(conf-if-te-1/42)# show config
!
interface TenGigabitEthernet 1/42
no ip address
switchport
vlan-stack trunk
no shutdown
Dell(conf-if-te-1/42)# interface vlan 100
Dell(conf-if-vl-100)# vlan-stack compatible
Dell(conf-if-vl-100-stack)# member tengigabitethernet 1/42
Dell(conf-if-vl-100-stack)# show config
!
interface Vlan 100
no ip address
vlan-stack compatible
member TenGigabitEthernet 1/42
shutdown
Dell(conf-if-vl-100-stack)# interface vlan 20
Dell(conf-if-vl-20)# tagged Tengigabitethernet 1/42
Dell(conf-if-vl-20)# show config
!
interface Vlan 20
no ip address
tagged TenGigabitEthernet 1/42
shutdown
Dell(conf-if-vl-20)# do show vlan
Codes: * - Default VLAN, G - GVRP VLANs
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack
NUM Status Description Q Ports
* 1 Inactive
20 Active T Te 1/42
100 Active M Te 1/42
Dell(conf-if-vl-20)#
Example 2
Dell(config)# vlan-stack protocol-type 88A8
Dell(config)# interface TenGigabitethernet 3/10
Dell(conf-if-te-3/10)# no shutdown
Dell(conf-if-te-3/10)# switchport
Dell(conf-if-te-3/10)# vlan-stack access
Dell(conf-if-te-3/10)# exit
Dell(config)# interface TenGigabitethernet 5/1
Dell(conf-if-te-5/1)# no shutdown
Dell(conf-if-te-5/1)# portmode hybrid
Dell(conf-if-te-5/1)# switchport
Dell(conf-if-te-5/1)# vlan-stack trunk
Dell(conf-if-te-5/1)# exit
Dell(config)# interface vlan 10
Dell(conf-if-vlan)# vlan-stack compatible
Dell(conf-if-vlan)# member Te 4/1, Te 3/10, TenGi 5/1
Dell(conf-if-vlan)# exit
Dell(config)# interface vlan 30
Dell(conf-if-vlan)# untagged TenGi 5/1
Dell(conf-if-vlan)# exit
Dell(config)#
VLAN Stacking
1633