Users Guide
• show clock — displays the current clock settings.
clock timezone
Congure a timezone for the switch.
Syntax
clock timezone timezone-name offset
To delete a timezone conguration, use the no clock timezone command.
Parameters
timezone-name Enter the name of the timezone. You cannot use spaces.
oset Enter one of the following:
• a number from 1 to 23 as the number of hours in addition to universal time
coordinated (UTC) for the timezone.
• a minus sign (-) then a number from 1 to 23 as the number of hours.
Defaults Not congured.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information Coordinated universal time (UTC) is the time standard based on the International Atomic Time standard,
commonly known as Greenwich Mean time. When determining system time, include the dierentiator
between UTC and your local timezone. For example, San Jose, CA is the Pacic Timezone with a UTC oset
of -8.
1586
System Time and Date