Users Guide

SupportAssist Activity Commands
Dell Networking OS supports the following SupportAssist Activity mode commands.
action-manifest get
Copy an action-manifest le for an activity to the system.
Syntax
action-manifest get tftp | ftp | flash <file-specification> <local-file-
name>
Parameters
le-specication
Enter the full le specication for the action-manifest le. For example:
• tftp://hostip/lepath
• ftp://userid:password@hostip/lepath
• scp://userid:password@hostip/lepath
local-le-name Enter the name of the local action-manifest le, up to 32 characters long. Allowable
characters are: a to z, A to Z, 0 to 9, -, _, and space.
Command Modes SUPPORTASSIST ACTIVITY
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage Information The remote le specication includes the protocol that is used to copy the le from the remote system.
Related Commands
• action-manifest install — congure the action-manifest to use for a specic activity.
• action-manifest show — view the list of action-manifest for a specic activity.
• action-manifest remove — remove the action-manifest le for an activity.
action-manifest install
Congure the action-manifest to use for a specic activity.
Syntax
action-manifest install {default | <local-file-name>}
To revert to the default action-manifest le, use the action-manifest install default command.
Parameters
default Enter the keyword default to revert back to the default set of actions for an
activity.
local-le-name Enter the name of the local action-manifest le. Allowable characters are: a to z, A
to Z, 0 to 9, -, _, and space.
Defaults Default
Command Modes SUPPORTASSIST ACTIVITY
SupportAssist
1571