Users Guide

SupportAssist Commands
Dell Networking OS supports the following SupportAssist mode commands.
activity
Move to the SupportAssist Activity mode for an activity. Allow the user to congure customized details for a specic activity.
Syntax
activity {activity-name}
To remove all customized detail for a specic activity, use the no activity {activity-name}
command.
Parameters
activity-name
Enter one of the following keywords:
• Enter the keywords full-transfer to specify transfer of conguration,
inventory, logs, and other information.
Command Modes SUPPORTASSIST
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage Information
By default, each activity follows a set of default actions using a default schedule. Using this command, you
can customize the set of actions and disable a certain activity.
contact-company
Congure the contact information for the company.
Syntax
contact-company name {company-name}[company-next-name] ... [company-next-
name]
To remove the contact company information, use the no contact-company command.
Parameters
company-name Enter the name for the company. If there are multiple words in the name, use
optional additional elds.
company-next-
name
(OPTIONAL) Enter the next components of the company name, up to 5
components are allowed.
Command Modes SUPPORTASSIST
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
1568
SupportAssist