Users Guide

Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
radius-server group
Creates or deletes a group of radius servers.
Syntax
radius-server group group-name
Parameters
group-name Enter the group name that denotes the group of RADIUS servers.
Defaults Not congured.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Example
Dell(conf)# radius-server group group1
Dell(conf-radius-group)# radius-server host 1.1.1.1 key secret
Dell(conf-radius-group)# radius-server host 2.2.2.2 key secret
Dell(conf-radius-group)# radius-server vrf vrf1 source-interface
tengigabitethernet 1/36
Dell(conf-radius-group)# show config
!
radius-server group group1
radius-server vrf vrf1 source-interface TenGigabitEthernet 1/36
radius-server host 1.1.1.1 key 7 9a2f3ec0c65c6f41
radius-server host 2.2.2.2 key 7 9a2f3ec0c65c6f41
Dell(conf-radius-group)#
Related Commands
• login authentication — sets the database to be checked when a user logs in.
• radius-server key — sets an authentication key for RADIUS communications.
• radius-server retransmit — sets the number of times the RADIUS server attempts to send information.
1404
Security