Users Guide

theservice obscure-passwords command displays asterisks instead of the encrypted passwords and
keys. This command prevents a user from reading these passwords and keys by obscuring this information
with asterisks.
Password obscuring masks the password and keys for display only but does not change the contents of the
le. The string of asterisks is the same length as the encrypted string for that line of conguration. To verify
that you have successfully obscured passwords and keys, use the
show running-config command
or
show startup-config command.
If you are using role-based access control (RBAC), only the system administrator and security administrator
roles can enable the service obscure-password command.
Related Commands
• show running-cong— Display the current conguration and display changes from the default values.
• service password-encryption— Encrypts all passwords congured in the system.
Authentication and Password Commands
To manage access to the system, use the following the commands.
aaa authentication enable
Congure AAA Authentication method lists for user access to EXEC privilege mode (the “Enable” access).
Syntax
aaa authentication enable {default | method-list-name} method [... method2]
To return to the default setting, use the no aaa authentication enable {default | method-
list-name} method [... method2] command.
Parameters
default Enter the keyword default then the authentication methods to use as the
default sequence of methods for the Enable login. The default is default
enable
.
method-list-name Enter a text string (up to 16 characters long) to name the list of enabled
authentication methods activated at login.
method Enter one of the following methods:
• enable: use the password the enable password command denes in
CONFIGURATION mode.
• line: use the password the password command denes in LINE mode.
•
none: no authentication.
• radius: use the RADIUS servers congured with the radius-server
host command.
• tacacs+: use the TACACS+ server(s) congured with the tacacs-server
host command.
... method2 (OPTIONAL) In the event of a “no response” from the rst method, Dell
Networking OS applies the next congured method.
Defaults Use the enable password.
1386
Security