Users Guide
ip telnet server enable
Enable the Telnet server on the switch.
Syntax
ip telnet server enable
To disable the Telnet server, use the no ip telnet server enable command.
Defaults Enabled
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Related Commands
• ip ssh server — enables the secure shell (SSH) server on the system.
ip telnet server vrf
Congures the TELNET server on either a specic VRF or a management VRF.
S4810
Syntax
ip telnet server vrf {vrf-name | any | management}
To undo the TELNET server conguration, use the no ip telnet server [vrf vrf-name]
command.
Parameters
vrf-name Enter the vrf-name to specify the VRF that is used by the TELNET server.
any Enter the keyword any to enable server from any VRF.
management Enter the keyword management to specify a management VRF that is used by
the TELNET server.
Control and Monitoring
113