Users Guide

Version Description
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
Usage Information To redistribute the default route (0.0.0.0/0), congure the default-information originate
command.
Despite removing an OSPF process globally, the OSPF process is not completely removed from the BGP
conguration.
Related Commands
• default-information originate — generate a default route into the OSPF routing domain.
redistribute bgp
Redistribute BGP routing information throughout the OSPF instance.
S4810
Syntax
redistribute bgp as number [metric metric-value] | [metric-type type-value]
| [tag tag-value]
To disable redistribution, use the no redistribute bgp as number [metric metric-value]
| [metric-type type-value] [route-map map-name] [tag tag-value] command.
Parameters
as number Enter the autonomous system number. The range is from 1 to 65535.
metric metric-value (OPTIONAL) Enter the keyword metric then the metric-value number. The range
is from 0 to16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then one of the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into
OSPF. The range is from 0 to 4294967295.
Defaults None
Command Modes ROUTER OSPF
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
Open Shortest Path First (OSPFv2 and OSPFv3)
1127