Users Guide

Parameters
peer Enter the keyword peer to clear the MSDP peer entries.
peer-address Enter the IP address of the MSDP peer.
Defaults Without any options, this command clears the entire source-active cache.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
7.8.1.0 Added the local option.
7.7.1.0 Added the rejected-sa option.
6.2.1.1 Introduced
debug ip msdp
Turn on MSDP debugging.
S4810
Syntax
debug ip msdp {event peer address | packet peer address | pim}
To turn debugging o, use the no debug ip msdp {event peer address | packet peer
address | pim} command.
Parameters
event peer address Enter the keyword event then the peer address in a dotted decimal format
(A.B.C.D.).
packet peer
address
Enter the keyword packet then the peer address in a dotted decimal format
(A.B.C.D.).
pim Enter the keyword pim to debug advertisement from PIM.
Defaults Not congured.
Command Modes EXEC Privilege
Multicast Source Discovery Protocol (MSDP)
1021