Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4810P

991

992

993

994

995

996

997

998

999

1000

management-interface

Enable and congure LLDP protocol parameters on the management interface.

S4810

Syntax

management-interface

To remove LLDP conguration on a management interface, use the no management-interface

command.

Command Modes LLDP (conf-lldp)

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.2(1.0) Introduced on the Z9500.

9.2(0.2) Introduced on the Z9000 and S4810.

Usage Information

To enable LLDP on the management interface, use the no disable command in LLDP-MANAGEMENT-

INTERFACE mode (conf-lldp-mgmtIf).

mode

To receive or transmit, set LLDP.

S4810

Syntax

mode {tx | rx}

To return to the default, use the no mode command.

Parameters

tx Enter the keyword tx to set the mode to transmit.

rx Enter the keyword rx to set the mode to receive.

Defaults Both transmit and receive.

Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)