Reference Guide

Link Layer Discovery Protocol (LLDP) | 967
advertise med guest-voice-signaling
c e s
Configure the system to advertise a separate limited voice service for a guest user when the
guest voice control packets use a separate network policy than the voice data.
Syntax
advertise med guest-voice-signaling
{vlan-id layer2_priority DSCP_value} | {priority-tagged number}
To return to the default, use the no advertise med guest-voice-signaling {vlan-id layer2_priority
DSCP_value} |
{priority-tagged number} command.
Parameters
Defaults
unconfigured
Command Modes
CONFIGURATION (conf-lldp)
Command
History
\
Related
Commands
advertise med location-identification
c e s
Configure the system to advertise a location identifier.
Syntax
advertise med location-identification
{coordinate-based value | civic-based value | ecs-elin value}
To return to the default, use the
no advertise med location-identification {coordinate-based value |
civic-based value | ecs-elin value} command.
vlan-id
Enter the VLAN ID.
Range: 1 to 4094
layer2_priority
Enter the Layer 2 priority.
Range: 0 to 7
DSCP_value
Enter the DSCP value.
Range: 0 to 63
priority-tagged number
Enter the keyword priority-tagged followed the Layer 2 priority.
Range: 0 to 7
Version 8.3.7.0 Introduced on S4810
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series and E-Series
debug lldp interface Debug LLDP
show lldp neighbors Display the LLDP neighbors
show running-config lldp Display the LLDP running configuration