Reference Guide

Layer 2 | 929
Command Modes
EXEC
EXEC Privilege
Command
History
static
(OPTIONAL) Enter the keyword static to display only those MAC
address specifically configured on the switch.
interface interface (OPTIONAL) Enter the keyword interface followed by the interface
type, slot and port information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Port Channel interface, enter the keyword port-channel
followed by a number:
S-Series Range: 1 to 128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE
followed by the slot/port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to
display the MAC address assigned to the VLAN.
Range: 1 to 4094.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 7.6.1.0 This version of the command introduced for S-Series