Reference Guide

912 | Link Aggregation Control Protocol (LACP)
www.dell.com | support.dell.com
port-channel-protocol lacp
c e s
Enable LACP on any LAN port.
Syntax
port-channel-protocol lacp
To disable LACP on a LAN port, use the no port-channel-protocol lacp command.
Command Modes
INTERFACE
Command
History
Related
Commands
show lacp
c e s
Display the LACP matrix.
Syntax
show lacp port-channel-number [sys-id | counters]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
(show lacp
port-channel-number)
FTOS#show lacp 1
Port-channel 1 admin up, oper up, mode lacp
Actor System ID: Priority 32768, Address 0001.e800.a12b
Partner System ID: Priority 32768, Address 0001.e801.45a5
Actor Admin Key 1, Oper Key 1, Partner Oper Key 1
LACP LAG 1 is an aggregatable link
Version 8.3.7.0 Introduced on S4810
Version 6.2.1.1 Introduced
show lacp Display the LACP information.
show interfaces port-channel Display information on configured Port Channel groups.
port-channel-number
Enter a port-channel number:
C-Series and S-Series Range: 1 to 128
E-Series Range: 1 to 255 for TeraScale and 1 to 512 for ExaScale.
sys-id
(OPTIONAL) Enter the keyword sys-id and the value that identifies
a system.
counters
(OPTIONAL) Enter the keyword counters to display the LACP
counters.
Version 8.3.7.0 Introduced n S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 6.2.1.1 Introduced