Reference Guide

838 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
neighbor remove-private-as
c e
Remove private AS numbers from the AS-PATH of outgoing updates.
Syntax
neighbor ipv6-address | peer-group-name remove-private-as
To return to the default, use the no neighbor ipv6-address | peer-group-name remove-private-as
command.
Parameters
Defaults
Disabled (that is, private AS number are not removed).
Command Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
neighbor route-map
c e
Apply an established route map to either incoming or outbound routes of a BGP neighbor or
peer group.
Syntax
neighbor ipv6-address | peer-group-name route-map map-name [in | out]
To remove the route map, use the
no neighbor [ipv6-address | peer-group-name] route-map
map-name [in | out] command.
Parameters
Defaults
Not configured.
Command Modes
ROUTER BGPV6-ADDRESS FAMILY
ipv6-address
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format.
The :: notation specifies successive hexadecimal fields of zeros.
peer-group-name
(OPTIONAL) Enter the name of the peer group to remove the private
AS numbers
Version 8.4.2.1 Introduced on C-Series and S4810
Version 7.4.1.0 Introduced on E-Series TeraScale
ipv6-address
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format.
The :: notation specifies successive hexadecimal fields of zeros.
peer-group-name
(OPTIONAL) Enter the name of the peer group.
map-name
Enter the name of an established route map.
If the Route map is not configured, the default is deny (to drop all
routes).
in
Enter the keyword in to filter inbound routes.
out
Enter the keyword out to filter outbound routes.