Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 793
neighbor description
c e
Assign a character string describing the neighbor or group of neighbors (peer group).
Syntax
neighbor {ipv6-address | peer-group-name} description text
To delete a description, use the no neighbor {ipv6-address | peer-group-name} description text
command.
Parameters
Defaults
Not configured.
Command Modes
ROUTER BGP
Command
History
neighbor distribute-list
c e
Distribute BGP information via an established prefix list.
Syntax
neighbor {ipv6-address | peer-group-name} distribute-list prefix-list-name {in | out}
To delete a neighbor distribution list, use the
no neighbor {ipv6-address | peer-group-name}
distribute-list prefix-list-name {in | out} command.
Parameters
Defaults
Not configured.
Command Modes
ROUTER BGPV6-ADDRESS FAMILY
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
The :: notation specifies successive hexadecimal fields of zeros.
peer-group-name
Enter the name of the peer group.
text
Enter a continuous text string up to 80 characters.
Version 8.4.2.1 Introduced on C-Series and S4810
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
The :: notation specifies successive hexadecimal fields of zeros.
peer-group-name
Enter the name of the peer group.
prefix-list-name
Enter the name of an established prefix list.
If the prefix list is not configured, the default is permit (to allow
all routes).
in
Enter the keyword in to distribute only inbound traffic.
out
Enter the keyword out to distribute only outbound traffic.