Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 787
Parameters
Command Modes
EXEC Privilege
Command
History
Usage
Information
Enter the no debug ip bgp command to remove all configured debug commands for BGP.
debug ip bgp updates
c e
Allows you to view information about BGP updates.
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name | ipv6 unicast [ipv6-address]] updates
[
in | out | prefix-list prefix-list-name]
To disable debugging, use the
no debug ip bgp [ip-address | peer-group peer-group-name | ipv6
unicast
[ipv6-address]] updates [in | out] command.
Parameters
Command Modes
EXEC Privilege
ipv6-address
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
followed by the prefix length in the /x format.
Range: /0 to /128
The :: notation specifies successive hexadecimal fields of zeros.
peer-group peer-group-name
(OPTIONAL) Enter the keyword peer-group followed by the
name of the peer group.
in (OPTIONAL) Enter the keyword in to view BGP notifications
received from neighbors.
out
(OPTIONAL) Enter the keyword out to view BGP notifications
sent to neighbors.
Version 8.4.2.1 Introduced on C-Series and S4810
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
ipv6-address
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
followed by the prefix length in the /x format.
Range: /0 to /128
The :: notation specifies successive hexadecimal fields of zeros.
peer-group peer-group-name
(OPTIONAL) Enter the keyword peer-group followed by the
name of the peer group.
ipv6 unicast [ipv6-address] (OPTIONAL) Enter the keyword ipv6 unicast, and, optionally,
an ipv6 address.
in (OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
out
(OPTIONAL) Enter the keyword out to view only BGP updates
sent to neighbors.