Reference Guide

756 | IPv6 Basics
www.dell.com | support.dell.com
fe80::201:e8ff:fe3a:19b7
7::1/64
show ipv6 mld_host
Display the IPv6 MLD host counters.
Syntax
show ipv6 mld_host
Command Modes
EXEC
Example
MLD Host Traffic Counters
Elapsed time since counters cleared: 0028:33:52
Received Sent
Valid MLD Packets 97962 18036
Reports 79962 18034
Leaves ---- 0
MLDv2 Queries 18000 ----
MLDv1 Queries 0 ----
Errors:
Malformed Packets: 4510
Command
History
Usage
Information
The following table describes the information in the output example:
show ipv6 route
c e s
Displays the IPv6 routes.
Syntax
show ipv6 route [ipv6-address prefix-length] [hostname] [all] [bgp as number] [connected]
[
isis tag] [list prefix-list name] [ospf process-id] [rip] [static] [summary]
Parameter
Version 8.3.12.0 Introduced on the S4810.
Valid MLD Packets The total number of packets received and sent from the last time the
elapsed time was cleared.
Reports The total number of reports (queries and unsolicited reports generated
from joins or leaves) that have been received or sent.
Leaves The number of Multicast leaves that have been sent.
MLDv1 queries The number of MLDv1 queries that have been received.
MLDv2 queries The number of MLDv2 queries that have been received.
Malformed Packets The number of MLDv1 and MLDv2 packets that do not match the
requirement for a valid MLD packet.
ipv6-address
prefix-length
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by
the prefix length in the /x format.
Range: /0 to /128.
The :: notation specifies successive hexadecimal fields of zeros.
hostname
(OPTIONAL) View information for this IPv6 routes with Host Name