Reference Guide

696 | IPv4 Routing
www.dell.com | support.dell.com
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show ip route all
Codes: C - connected, S - static, R - RIP
B - BGP, IN - internal BGP, EX - external BGP, LO - Locally Originated
O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1
E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1
L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default
> - non-active route + - summary route
Gateway of last resort is not set
Destination Gateway Dist/Metric Last Change
----------- ------- ----------- -----------
R 3.0.0.0/8 via 100.10.10.10, So 2/8 120/1 00:07:12
via 101.10.10.10, So 2/9
C 100.10.10.0/24 Direct, So 2/8 0/0 00:08:54
> R 100.10.10.0/24 Direct, So 2/8 120/0 00:08:54
C 101.10.10.0/24 Direct, So 2/9 0/0 00:09:15
> R 101.10.10.0/24 Direct, So 2/9 120/0 00:09:15
list prefix-list
(OPTIONAL) Enter the keyword list and the name of a configured
prefix list. Refer to show ip route list.
protocol
(OPTIONAL) Enter the name of a routing protocol (bgp, isis, ospf, rip)
or the keywords connected or static.
bgp, isis, ospf, rip are E-Series-only options.
If you enter
bgp, you can include the BGP as-number. (E-Series only)
If you enter isis, you can include the ISIS routing-tag. (E-Series only)
If you enter ospf, you can include the OSPF process-id.
process-id
(OPTIONAL) Specify that only OSPF routes with a certain process ID
must be displayed.
routing-tag (OPTIONAL) Specify that only ISIS routes with a certain routing tag
must be displayed.
connected (OPTIONAL) Enter the keyword connected to view only the directly
connected routes.
all
(OPTIONAL) Enter the keyword all to view both active and non-active
routes.
static
(OPTIONAL) Enter the keyword static to view only routes configured
by the ip route command.
summary
(OPTIONAL) Enter the keyword summary. Refer to show ip route
summary.
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.9.1.0 Introduced VRF on the E-Series
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.0 Introduced for E-Series