Reference Guide

IPv4 Routing | 681
Example
(show arp
summary)
FTOS#show arp summary
Total Entries Static Entries Dynamic Entries CPU
------------------------------------------------------
83 0 83 CP
FTOS
Related
Commands
show arp retries
c e s
Display the configured number of ARP retries.
Syntax
show arp retries
Command Modes
EXEC
EXEC Privilege
Command
History
Related
Commands
Age(min) Displays the age in minutes of the ARP entry.
Hardware Address Displays the MAC address associated with the ARP entry.
Interface Displays the first two letters of the interfaces type and the slot/port
associated with the ARP entry.
VLAN Displays the VLAN ID, if any, associated with the ARP entry.
CPU Lists which CPU the entries are stored on.
Table 23-4. show arp Command Example Fields (continued)
Row Heading Description
Table 23-5. show arp summary Command Example Fields
Row Heading Description
Total Entries Lists the total number of ARP entries in the ARP table.
Static Entries Lists the total number of configured or static ARP entries.
Dynamic Entries Lists the total number of learned or dynamic ARP entries.
CPU Lists which CPU the entries are stored on.
ip local-proxy-arp Enable/disable Layer 3 communication in secondary VLANs.
switchport mode
private-vlan
Set the PVLAN mode of the selected port.
Version 8.3.1.0 Introduced
arp retries Set the number of ARP retries in case the system does not receive an
ARP reply in response to an ARP request.