Reference Guide

Interfaces | 615
Gi 0/13 Down Auto Auto --
Gi 0/14 Down Auto Auto --
Gi 0/15 Down Auto Auto --
FTOS#
Related
Commands
show interfaces switchport
c e s
Display only virtual and physical interfaces in Layer 2 mode. This command displays the
Layer 2 mode interfaces’ IEEE 802.1Q tag status and VLAN membership.
Syntax
show interfaces switchport [interface [linecard slot-number] | stack-unit unit-id ]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show interfaces switchport
Name: GigabitEthernet 13/0
show interfaces Display information on a specific physical interface or virtual
interface.
interface
Enter one of the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
followed by the slot/port information.
• For a Port Channel interface, enter the keyword port-channel followed by a
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 255 for TeraScale and 1 to 512 for ExaScale.
• For SONET interfaces, enter the keyword sonet followed by the slot/port
information. This keyword is only available on E-Series and C-Series.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed
by the slot/port information.
• Enter the keyword backup to view the backup interface for this interface.
linecard
slot-number
(OPTIONAL) Enter the keyword linecard followed by the slot number. This
option is available only on E-Series and C-Series.
C-Series Range: 0-7 for C300; 0–3 for C150
E-Series Range: 0 to 13 on the E1200, 0 to 6 on the E600, 0 to 5 on the E300
stack-unit
unit-id
(OPTIONAL) Enter the keyword stack-unit followed by the stack member
number. This option is available only on S-Series.
Range: 0 to 1
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.2.1.0 Support for 4093 VLANs on E-Series ExaScale
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for hybrid port/native VLAN, introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series legacy command