Reference Guide

GARP VLAN Registration (GVRP) | 533
Command
History
Example
R3#show gvrp brief
GVRP Feature is currently enabled.
Port GVRP Status Edge-Port
-------------------------------------------------------
Gi 3/0 Disabled No
Gi 3/1 Disabled No
Gi 3/2 Enabled No
Gi 3/3 Disabled No
Gi 3/4 Disabled No
Gi 3/5 Disabled No
Gi 3/6 Disabled No
Gi 3/7 Disabled No
Gi 3/8 Disabled No
R3#show gvrp brief
Usage
Information
If no ports are GVRP participants, the message output changes from:
GVRP Participants running on <port_list>
to
GVRP Participants running on no ports
Related
Commands
show gvrp statistics
c e s
Display the GVRP configuration statistics.
Syntax
show gvrp statistics {interface interface | summary}
Parameters
Defaults
No default values or behavior
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on C, E, and S-Series
show gvrp statistics Display the GVRP statistics
interface interface Enter the keyword interface followed by one of the interface keywords
and slot/port or number information:
• For a Fast Ethernet interface, enter the keyword FastEthernet
followed by the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Port Channel interface, enter the keyword port-channel
followed by a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 255 for TeraScale and 1 to 512 for ExaScale.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE
followed by the slot/port information.
summary
Enter the keyword summary to display just a summary of the GVRP
statistics.