Reference Guide

514 | FIP Snooping
www.dell.com | support.dell.com
show fip-snooping system
Display information on the status of FIP snooping on the switch (enabled or disabled), including the
number of FCoE VLANs, FCFs, ENodes, and currently active sessions.
Syntax
show fip-snooping system
Command Mode
EXEC
EXEC Privilege
Command
History
Example
FTOS# show fip-snooping system
Global Mode : Enabled
FCOE VLAN List (Operational) : 1, 100
FCFs : 1
Enodes : 2
Sessions : 17
show fip-snooping vlan
Display information on the FCoE VLANs on which FIP snooping is enabled.
Syntax
show fip-snooping vlan
Command Mode
EXEC
EXEC Privilege
Example
FTOS# show fip-snooping vlan
* = Default VLAN
VLAN FC-MAP FCFs Enodes Sessions
---- ------ ---- ------ --------
*1 - - - -
100 0X0EFC00 1 2 17
Number of FLOGO Accepts Number of FIP FLOGO accept frames received on the interface
Number of FLOGO Rejects Number of FIP FLOGO reject frames received on the interface
Number of CVLs Number of FIP clear virtual link frames received on the
interface
Number of FCF Discovery
Timeouts
Number of FCF discovery timeouts that occurred on the
interface
Number of VN Port Session
Timeouts
Number of VN port session timeouts that occurred on the
interface
Number of Session failures due to
Hardware Config
Number of session failures due to hardware configuration that
occurred on the interface
Table 16-4. show fip-snooping statistics Command Fields Description (continued)
Field Description
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module