Reference Guide

FIP Snooping | 507
Command
History
feature fip-snooping
Enable the FIP snooping feature on a switch.
Syntax
feature fip-snooping
To disable the FIP snooping feature, use the no feature fip-snooping command.
Defaults
Disabled.
Command Modes
CONFIGURATION
Command
History
fip-snooping enable
Enable FIP snooping on all VLANs or on a specified VLAN.
Syntax
fip-snooping enable
To disable the FIP snooping feature on all or a specified VLAN, use the no fip-snooping enable
command.
Defaults
FIP snooping is disabled on all VLANs.
Command Modes
CONFIGURATION
VLAN INTERFACE
Command
History
Usage
Information
The maximum number of FCFs supported per FIP snooping-enabled VLAN is four. The maximum
number of FIP snooping sessions supported per ENode server is 16.
fip-snooping fc-map
Configure the FC-MAP value used by FIP snooping on all VLANs.
Syntax
fip-snooping fc-map fc-map-value
To remove the configured FM-MAP value, use the no fip-snooping fc-map command.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module