Reference Guide

506 | FIP Snooping
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC Privilege
Command
History
clear fip-snooping statistics
Clears the statistics on the FIP packets snooped on all VLANs, a specified VLAN, or a specified port
interface.
Syntax
clear fip-snooping statistics [interface vlan vlan-id | interface port-type port/slot | interface
port-channel port-channel-number]
Parameters
Command Modes
EXEC Privilege
Command
History
debug fip snooping
Enable debugging on FIP Snooping.
Syntax
debug fip-snooping [all | acl | error | ifm | info | ipc | rx]
Parameters
Command Modes
EXEC Privilege
enode-mac-address
Enter the ENode MAC address to be cleared of FIP snooping information.
fcf-mac-address
Enter the FCF MAC address to be cleared of FIP snooping information.
session-mac-address
Enter the MAC address for the session to be cleared of FIP snooping information.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module
vlan-id Enter the VLAN ID of the FIP packet statistics to be cleared.
port-type port/slot
Enter the port-type and slot number of the FIP packet statistics to be cleared.
port-channel-
number]
Enter the port channel number of the FIP packet statistics to be cleared.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module
all
Enter the keyword
all to enable debugging on all the options.
acl
Enter the keyword
acl for ACL-specific debugging
error
Enter the keyword
error for error-specific debugging
ifm
Enter the keyword
ifm for IFM-specific debugging
info
Enter the keyword
info for information-specific debugging
ipc
Enter the keyword
ipc for IPC-specific debugging
rx
Enter the keyword
rx for debugging received packets