Reference Guide

48 | File Management
www.dell.com | support.dell.com
Command Modes
EXEC Privilege
Command
History
Example
FTOS#show linecard boot-information
-- Line cards --
Serial Booted Next Cache Boot
# Status CurType number from boot boot flash
---------------------------------------------------------------------------------------------------
0 -
1 -
2 -
3 online E48TF FX000032632 4.7.7.171 4.7.7.171 A: invalid B: invalid A: 2.3.2.1 [b] B: 2.3.2.1
4 -
5 -
6 -
FTOS#
show os-version
c e s
Display the release and software image version information of the image file specified or,
optionally, the image loaded on the RPM (C-Series and E-Series only).
Syntax
show os-version [file-url]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC Privilege
Command
History
Usage
Information
all
(OPTIONAL) Enter the keyword all to view a table with information on
all present linecards.
boot-information
(OPTIONAL) Enter the keyword boot-information to view cache boot
information of all line cards in table format.
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
file-url
(OPTIONAL) Enter the following location keywords and information:
• For a file on the internal Flash, enter flash:// followed by the filename.
• For a file on an FTP server, enter ftp://user:password@hostip/filepath
• For a file on the external Flash, enter slot0:// followed by the filename.
• For a file on a TFTP server, enter tftp://hostip/filepath
Note: ftp and tftp are the only S-Series options.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
Note: A filepath that contains a dot ( . ) is not supported.