Reference Guide

Data Center Bridging | 475
Command
History
Example
FTOS(conf)# show qos dcb-input
dcb-input pfc-profile
pfc link-delay 32
pfc priority 0-1
dcb-input pfc-profile1
no pfc mode on
pfc priority 6-7
show qos dcb-output
Displays the ETS configuration in a DCB output policy.
Syntax
show qos dcb-output [ets-profile]
Parameters
Command Mode
EXEC PRIVILEGE
Command
History
Example
FTOS# show qos dcb-output
dcb-output ets
priority-group san qos-policy san
priority-group ipc qos-policy ipc
priority-group lan qos-policy lan
show qos priority-groups
Displays the ETS priority groups configured on the switch, including the 802.1p priority classes and ID
of each group.
Syntax
show qos priority-groups
Command Mode
EXEC PRIVILEGE
Command
History
Example
FTOS#show qos priority-groups
priority-group ipc
priority-list 4
set-pgid 2
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module
[ets-profile] Enter the ETS profile.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module