Reference Guide

440 | Control Plane Policing (CoPP)
www.dell.com | support.dell.com
Parameters
Defaults
Not configured.
Command Modes
CONTROL-PLANE-CPUQOS
Command
History
Usage
Information
A policy-map must be created by associating a queue number with the qos-policy.
The QoS policies must be created prior to enabling this command.
Related
Commands
service-policy rate-limit-protocols
Apply a policy for the system to rate limit control protocols on a per-protocol basis.
Syntax
service-policy rate-limit-protocols policy-name
Parameters
Defaults
Not configured.
Command Modes
CONTROL-PLANE-CPUQOS
Command
History
Usage
Information
This command applies the service-policy based on the type of protocol defined in the ACL
rules.
The ACL and QoS policies must be created prior to enabling this command.
Related
Commands
policy-name Enter the service-policy name, in a string up to 140 characters.
Version 8.3.8.0 Introduced on S4810
qos-policy-input Create a QoS input policy map.
class-map Create a QoS class map.
policy-map-input Create an input policy map.
policy-name Enter the service-policy name, in a string up to 140 characters.
Version 8.3.8.0 Introduced on S4810
ip access-list extended Create an extended IP ACL
ipv6 access-list Create an IPv6 ACL
mac access-list extended Create an extended MAC ACL.
qos-policy-input Create a QoS input policy map.
class-map Create a QoS class map.
policy-map-input Create an input policy map.