Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 399
show ip bgp ipv4 multicast neighbors
c e
t
s
Enables you to view the information exchanged by BGP neighbors.
Syntax
show ip bgp ipv4 multicast neighbors [ip-address [advertised-routes | dampened-routes | detail |
flap-statistics | routes]]
Parameters
Command Modes
EXEC
EXEC Privilege
Example
FTOS#show ip bgp ipv4 multicast neighbors
BGP neighbor is 25.25.25.25, remote AS 6400, internal link
BGP version 4, remote router ID 25.25.25.25
BGP state ESTABLISHED, in this state for 00:02:18
Last read 00:00:16, hold time is 180, keepalive interval is 60 seconds
Received 1404 messages, 0 in queue
3 opens, 1 notifications, 1394 updates
6 keepalives, 0 route refresh requests
Sent 48 messages, 0 in queue
3 opens, 2 notifications, 0 updates
43 keepalives, 0 route refresh requests
Minimum time between advertisement runs is 5 seconds
Minimum time before advertisements start is 0 seconds
Capabilities received from neighbor for IPv4 unicast :
MULTIPROTO_EXT(1)
ROUTE_REFRESH(2)
CISCO_ROUTE_REFRESH(128)
Capabilities advertised to neighbor for IPv4 Multicast :
MULTIPROTO_EXT(1)
ROUTE_REFRESH(2)
CISCO_ROUTE_REFRESH(128)
Update source set to Loopback 0
For address family: IPv4 Multicast
BGP table version 14, neighbor version 14
3 accepted prefixes consume 12 bytes
Prefixes accepted 1 (consume 4 bytes), withdrawn 0 by peer
Prefixes advertised 0, rejected 0, withdrawn 0 from peer
Connections established 2; dropped 1
Last reset 00:03:17, due to user reset
Notification History
'Connection Reset' Sent : 1 Recv: 0
ip-address
(OPTIONAL) Enter the IP address, in either IPv4 or IPv6 format, of the
neighbor to view only BGP information exchanged with that neighbor.
advertised-routes
(OPTIONAL) Enter the keywords advertised-routes to view only the
routes the neighbor sent.
dampened-routes
(OPTIONAL) Enter the keyword dampened-routes to view information
on dampened routes from the BGP neighbor.
detail
(OPTIONAL) Display detailed neighbor information.
flap-statistics
(OPTIONAL) Enter the keyword flap-statistics to view flap statistics on
the neighbor’s routes.
routes
(OPTIONAL) Enter the keywords routes to view only the neighbor’s
feasible routes.