Reference Guide

368 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
Related
Commands
show ip bgp next-hop
c e s
View all next hops (via learned routes only) with current reachability and flap status. This
command only displays one path, even if the next hop is reachable by multiple paths.
Syntax
show ip bgp next-hop
Command Modes
EXEC
EXEC Privilege
Example
FTOS>show ip bgp next-hop
Next-hop Via RefCount Cost Flaps Time Elapsed
63.114.8.33 63.114.8.33, Gi 12/22 240984 0 0 00:18:25
63.114.8.34 63.114.8.34, Gi 12/22 135152 0 0 00:18:13
63.114.8.35 63.114.8.35, Gi 12/22 1 0 0 00:18:07
63.114.8.60 63.114.8.60, Gi 12/22 135155 0 0 00:18:11
FTOS>
(list of inbound and outbound
policies)
Displays the policy commands configured and the names of the
Route map, AS-PATH ACL or Prefix list configured for the
policy.
For address family: Displays IPv4 Unicast as the address family.
BGP table version Displays the which version of the primary BGP routing table
the router and the neighbor are using.
accepted prefixes Displays the number of network prefixes accepted by the
router and the amount of memory used to process those
prefixes.
Prefix advertised Displays the number of network prefixes advertised, the
number rejected and the number withdrawn from the BGP
routing table.
Connections established Displays the number of TCP connections established and
dropped between the two peers to exchange BGP information.
Last reset Displays the amount of time since the peering session was last
reset. Also states if the peer resets the peering session.
If the peering session was never reset, the word never is
displayed.
Local host: Displays the peering address of the local router and the TCP
port number.
Foreign host: Displays the peering address of the neighbor and the TCP port
number.
Table 9-9. Command Example fields: show ip bgp neighbors
Lines beginning with Description
show ip bgp View the current BGP routing table.