Reference Guide

322 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
Command Modes
EXEC Privilege
Usage
Information
Enter no debug ip bgp command to remove all configured debug commands for BGP.
Command
History
default-metric
c e s
Enables you to change the metrics of redistributed routes to locally originated routes. Use this
command with the redistribute command.
Syntax
default-metric number
To return to the default setting, enter no default-metric.
Parameters
Defaults
0
Command Modes
ROUTER BGP
Usage
Information
The default-metric command in BGP sets the value of the BGP MULTI_EXIT_DISC (MED)
attribute for redistributed routes only.
Related
Commands
Command
History
description
c e s
Enter a description of the BGP routing protocol
Syntax
description {description}
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
peer-group-name
(OPTIONAL) Enter the name of the peer group to disable or enable all
routers within the peer group.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1 Introduced support on C-Series
number
Enter a number as the metric to be assigned to routes from other protocols.
Range: 1 to 4294967295.
bgp always-compare-med Enable comparison of all BGP MED attributes.
redistribute Redistribute routes from other routing protocols into BGP.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series