Reference Guide

320 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC Privilege
Usage
Information
Enter no debug ip bgp command to remove all configured debug commands for BGP.
Command
History
debug ip bgp notifications
c e s
Enables you to view information about BGP notifications received from neighbors.
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] notifications [in | out]
To disable debugging, use the
no debug ip bgp [ip-address | peer-group peer-group-name]
notifications [in | out] command.
Parameters
Command Modes
EXEC Privilege
Usage
Information
Enter no debug ip bgp command to remove all configured debug commands for BGP.
Command
History
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
peer-group
peer-group-name
(OPTIONAL) Enter the keyword peer-group followed by the name of
the peer group.
in (OPTIONAL) Enter the keyword in to view only inbound keepalive
messages.
out
(OPTIONAL) Enter the keyword out to view only outbound keepalive
messages.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
peer-group
peer-group-name
(OPTIONAL) Enter the keyword peer-group followed by the name of
the peer group.
in (OPTIONAL) Enter the keyword in to view BGP notifications received
from neighbors.
out
(OPTIONAL) Enter the keyword out to view BGP notifications sent to
neighbors.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series