Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 319
Command
History
debug ip bgp events
c e s
Display information on local BGP state changes and other BGP events.
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] events [in | out]
To disable debugging, use the
no debug ip bgp [ip-address | peer-group peer-group-name] events
command.
Parameters
Command Modes
EXEC Privilege
Usage
Information
Enter no debug ip bgp command to remove all configured debug commands for BGP.
Command
History
debug ip bgp keepalives
c e s
Display information about BGP keepalive messages.
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] keepalives [in | out]
To disable debugging, use the
no debug ip bgp [ip-address | peer-group peer-group-name]
keepalives [in | out] command.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
peer-group
peer-group-name
(OPTIONAL) Enter the keyword peer-group followed by the name of
the peer group.
in (OPTIONAL) Enter the keyword in to view only events on inbound
BGP messages.
out
(OPTIONAL) Enter the keyword out to view only events on outbound
BGP messages.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series