Reference Guide

300 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
bgp four-octet-as-support
bgp asnotation asdot
FTOS(conf)#router bgp 1
FTOS(conf-router_bgp)#bgp asnotation asdot+
FTOS(conf-router_bgp)#ex
FTOS(conf)#do show run | grep bgp
router bgp 1
bgp four-octet-as-support
bgp asnotation asdot+
FTOS(conf)#router bgp 1
FTOS(conf-router_bgp)#bgp asnotation asplain
FTOS(conf-router_bgp)#ex
FTOS(conf)#do show run |grep bgp
router bgp 1
bgp four-octet-as-support
FTOS(conf)#
bgp bestpath as-path ignore
c e s
Ignore the AS PATH in BGP best path calculations.
Syntax
bgp bestpath as-path ignore
To return to the default, enter
no bgp bestpath as-path ignore.
Defaults
Disabled (that is, the software considers the AS_PATH when choosing a route as best).
Command Modes
ROUTER BGP
Usage
Information
If you enable this command, use the clear ip bgp * command to recompute the best path.
Command
History
bgp bestpath as-path multipath-relax
z
Include prefixes received from different AS paths during multipath calculation.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series