Reference Guide

176 | 802.1X
www.dell.com | support.dell.com
Parameters
Defaults
30 seconds
Command Modes
INTERFACE
Command
History
show dot1x cos-mapping interface
c s
Display the CoS priority-mapping table provided by the RADIUS server and applied to
authenticated supplicants on an 802.1X-enabled port.
Syntax
show dot1x cos-mapping interface interface [mac-address mac-address]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC privilege
Command
History
Usage
Information
Enter a supplicant’s MAC address using the mac-address option to display CoS mapping
information only for the specified supplicant.
You can display the CoS mapping information applied to traffic from authenticated
supplicants on 802.1X-enabled ports that are in single-host, multi-host, and multi-supplicant
authentication modes.
Example
FTOS#show dot1x cos-mapping interface gigabitethernet 2/21
802.1p CoS re-map table on Gi 2/21:
----------------------------------
Dot1p Remapped Dot1p
seconds Enter the interval time, in seconds, that EAPOL PDUs are transmitted.
Range: 1 to 65535
Default: 30
Version 8.3.12.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
interface Enter one of the following keywords and slot/port or number information:
• For a Gigabit Ethernet interface, enter the keyword GigabitEthernet
followed by the slot/port information.
• For a Fast Ethernet interface, enter the keyword FastEthernet followed by
the slot/port information.
• For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
mac-address (Optional) MAC address of an 802.1X-authenticated supplicant.
Version 8.3.12.0 Introduced on the S4810.
Version 8.4.2.1 Introduced on the C-Series and S-Series