Reference Guide

172 | 802.1X
www.dell.com | support.dell.com
Defaults
2
Command Modes
INTERFACE
Command
History
dot1x max-supplicants
c e
t
s
Restrict the number of supplicants that can be authenticated and permitted to access the
network through the port. This configuration is only takes effect in multi-auth mode.
Syntax
dot1x max-supplicants number
Parameters
Defaults
128 hosts can be authenticated on a single authenticator port.
Command Modes
INTERFACE
Command
History
Related
Commands
dot1x port-control
c e s
Enable port control on an interface.
Syntax
dot1x port-control {force-authorized | auto | force-unauthorized}
Parameters
Defaults
No default behavior or values
Command Modes
Auto
Version 8.3.12.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
number Enter the number of supplicants that can be authenticated on a single port
in multi-auth mode.
Range: 1-128
Default: 128
Version 8.3.12.0 Introduced on the S4810.
Version 8.4.1.0 Introduced on C-Series and S-Series
dot1x host-mode Enable single-host or multi-host authentication
force-authorized
Enter the keyword force-authorized to forcibly authorize a port.
auto
Enter the keyword auto to authorize a port based on the 802.1X
operation result.
force-unauthorized
Enter the keyword force-unauthorized to forcibly de-authorize a port.