Reference Guide

802.1ag | 157
ethernet cfm mip
s
Create a MIP.
Syntax
ethernet cfm mip
domain {name | level} ma-name name
Parameters
Defaults
None
Command Modes
INTERFACE
Command
History
mep cross-check
s
Enable cross-checking for a MEP.
Syntax
mep cross-check mep-id
Parameters
Defaults
None
Command Modes
ECFM DOMAIN
Command
History
mep cross-check enable
s
Enable cross-checking.
Syntax
mep cross-check enable
{port | vlan-id}
Parameters
Defaults
None
Command Modes
ECFM DOMAIN
domain [name | level] Enter this keyword followed by the domain name or domain level.
ma-name name Enter this keyword followed by the name of the maintenance
association.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on S-Series
mep-id
Enter the MEP ID
Range: 1-8191
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on S-Series
port
Down service with no VLAN association.
vlan-id
Enter the VLAN to apply the cross-check.