Reference Guide

S-Series Debugging and Diagnostics | 1515
show hardware layer2 acl
s
Display Layer 2 ACL data for the selected stack member and stack member port-pipe.
Syntax
show hardware layer2 acl stack-unit 0-7 port-set 0-1
Parameters
Defaults
No default behavior
Command Modes
EXEC Privilege
Command
History
show hardware layer3
s
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware layer3 {acl | qos} stack-unit 0-7 port-set 0-1
Parameters
Defaults
No default behavior
Command Modes
EXEC Privilege
Command
History
show hardware stack-unit
s
Display the data plane or management plane input and output statistics of the designated
component of the designated stack member.
Syntax
show hardware stack-unit 0-7 {buffer [buffer unit | port [(0-27) | all] total buffer | buffer unit (1) port
(0-64)
queue [(0-14) | a11] buffer-info]} {cpu data-plane statistics [stack-port 0-52] | cpu party-bus
statistics | drops
[unit 0-1 [port 0-27]] | stack-port 0-52 | unit 0-1 {counters | details | port-stats
[detail] | register}}
stack-unit 0-7 Enter the keyword stack-unit followed by 0 to 7 to select a stack ID.
port-set 0-1 Enter the keyword port-set with a port-pipe number — 0 or 1. The S25
models of the S-Series have only port-pipe 0.
Version 7.8.1.0 Introduced on S-Series
acl | qos Enter either the keyword acl or the keyword qos to select between
ACL or QoS data.
stack-unit 0-7 Enter the keyword stack-unit followed by a numeral from 0 to 7 to
select a stack ID.
port-set 0-1 Enter the keyword port-set with a port-pipe number — 0 or 1. The
S25 models of the S-Series have only port-pipe 0.
Version 7.8.1.0 Introduced on S-Series