Reference Guide

1436 | System Time and Date
www.dell.com | support.dell.com
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
Related
Commands
clock timezone
c e s
Configure a timezone for the switch.
start-day
Enter the name of the day that you want daylight saving time to begin. Use
English three letter abbreviations, for example, Sun, Sat, Mon, etc.
Range: Sun – Sat
start-month
Enter the name of one of the 12 months in English.
start-time
Enter the time in hours:minutes. For the hour variable, use the 24-hour format,
example, 17:15 is 5:15 pm.
end-week
Enter the one of the following as the week that daylight saving ends:
•
week-number: enter a number from 1-4 as the number of the week to end
daylight saving time.
•
first: enter the keyword first to end daylight saving time in the first week of
the month.
•
last: enter the keyword last to end daylight saving time in the last week of the
month.
end-day
Enter the weekday name that you want daylight saving time to end. Enter the
weekdays using the three letter abbreviations, for example Sun, Sat, Mon etc.
Range: Sun to Sat
end-month
Enter the name of one of the 12 months in English.
end-time
Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour
format, example, 17:15:00 is 5:15 pm.
offset (OPTIONAL) Enter the number of minutes to add during the summer-time
period.
Range: 1 to 1440.
Default: 60 minutes.
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 7.4.1.0 Updated the start-day and end-day options to allow for using the three-letter
abbreviation of the weekday name.
pre-Version
6.1.1.0
Introduced for E-Series
calendar set Set the hardware clock.
clock summer-time date Set a date (and time zone) on which to convert the switch to daylight
saving time on a one-time basis.
show clock Display the current clock settings.